Skip to main content
Version: 4.1.0

Release Notes

INAV Banner

Hello and welcome to INAV 4.1 "Red Kite"​

Please carefully read all of this document for the best possible experience and safety.

Your contribution from the past month has been very welcome! Thanks!

Tested and suggested hardware can be found here

Important notes​

This release is fully supported only with INAV Configurator 4.1. When an older version of Configurator is used, the OSD tab will not work!

Upgrading from a previous release​

Upgrading from INAV 4.0​

  1. Use INAV Configurator 4.0 CLI to make a diff of the current configuration
  2. Store the diff output
  3. Download INAV Configurator 4.1 and flash INAV 4.1 firmware with FULL CHIP ERASE
  4. Connect with INAV Configurator and restore the diff with the CLI tab

Upgrading from older versions​

Please follow the instructions on this page.

Important changes​

  1. HDzero OSD canvas mode support
  2. SD card support on Kakute H7 flight controllers
  3. Improved Matrix filter tracks now 3 gyro noise peaks instead of only 1
  4. Lowered Airmode threshold to improve Airmode handling on powerful multirotors
  5. Fixed RTH Sanity Checking
  6. RTH MAX mode uses RTH Altitude. If not 0, MAX mode will use RTH Altitude as the minimum altitude

What's Changed​

The full list of changes is available here

New Contributors​